DAXTROMN Parallel 5.5KW Solar Inverter Pure Sine Wave Hybrid Inverter 24V 48V 100A MPPT Solar Charger 500VDC solar Hybrid Inverter
Feature Of GGH-6.5KVA Hybrid Solar Inverter
1. With BMS
2. Supports parallel connection of up to 6 units of 33KW and 3 phases
3. Supports RS232
4. Lithium battery activation function
5. Dry contact can start the generator
6. The mainboard has a waterproof coating, resistant to moisture corrosion, suitable for long-term use
7. MOSFET pin protection to prevent insects from crawling in and short circuits
8. Pure sine wave solar inverter
9. Maximum 100A MPPT solar charger
10. Maximum 500VDC PV input
11. Large wire diameter is used internally to reduce heat generation
12. True hybrid solar inverter for 24V/48V systems
13. Works efficiently with or without batteries
14. Supports 50hz or 60hz (programmable)
15. Able to use AC grid or generator power
16. Built-in dustproof kit to adapt to harsh environments
17. Intelligent fan, saves power and reduces noise at low load and no load
18. Mix power Supports hybrid power supply of grid and solar energy to ensure that electricity is not wasted
19. Can work without batteries, saving costs
What is the BMS model?
Difference between BMS and without BMS:
If the battery has BMS, after plugging in the BMS, the inverter and the battery will communicate and automatically adjust the charging voltage cut-off voltage and other parameters, and various parameters will be adjusted at any time according to the condition of the battery, which will be a higher level for the life of the battery and the safety of use.
The inverter and battery need to have BMS functions at the same time to communicate with each other.
Note:
Up to 6 units can be connected in parallel.
This is a wide voltage Hybrid Solar inverter, If Solar Inverter without external battery ,The voltage which starts to connect to the solar panel must be above 150V for the inverter to work normally, if with external battery 120V is working.
Question & Answer
Specification Of 3500W 5500W Hybrid Solar Inverter
Model | GGH-6.5KVA-PARALLEL |
Phase | 1-Phase/3-Phase |
Maximum PV Input Power | 5500W |
Rated Output Power | 5500W/5500VA |
Maximum Solar Charging Current | 100A |
GRID-TIE OPERATION | |
PV Input(DC) | |
Nominal DC Voltage/Maximum DC Voltage | 360VDC/500VDC |
Start-up Voltage/Initial Feeding Voltage | 90VDC/120VDC |
MPPT Voltage Range | 90~450VDC |
Number of MPPT/Max Input Current | 1/23A |
GRID OUTPUT(AC) | |
Norminal Output Voltage | 220/230/240VAC |
Output Valtage Range | 195.5~253VAC |
Norminal Output Current | 27.0A |
Feed-in Grid Frequency Range | 49~51±1Hz |
OFF-GRID OPERATION | |
AC Input | |
AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC |
Acceptable Input Voltage Range | 90-280VAC or 170-280VAC |
Maximum AC Input Current | 60A |
Nominal operating frequency | 50/60Hz |
Surge power | 11000VA |
BATTERY MODE OUTPUT(AC) | |
Nominal Output Voltage | 220/230/240VAC |
Output Waveform | Pure sine wave |
Efficiency(DC to AC) | 94% |
BATTERY&CHARGER | |
Nominal DC Voltage | 48VDC |
Maximum Solar Charging Current | 100A |
Maximum AC Charging Current | 60A |
PHYSICAL | |
Dimension,D*W*H(mm) | 302*490*110 |
Net Weight(Kgs) | 9.7 |
INTERFACE | |
Communication Port | RS23/RS485CAN/Dry contact |
ENVIRONMENT | |
Operating Temperature | -10~50℃ |