How to setting Daxtromn AGH-6.2KW Hybrid solar inverter?

Jun 02,2023 | Daxtromn power

How to setting Daxtromn AGH-6.2KW AGH-3.6KW Hybrid solar inverter?

This page you can translate to other laguange by chrome or edge or choose the one right-up language option

Program

Description

Selectable option

Exit setting mode

Escape(default)

One-button restore setting options

Output source priority: To configure load power source priority

Utility First

Utility will provide power to the loads as first priority.

Solar and battery energy will

provide power to the loads only when utility power is not available.

Solar first (default)

Solar energy provides power to

the loads as first priority.

If solar energy is not sufficient to power all connected loads, utility will supply power to the loads at the same time.

Battery provides power to the loads only when any one condition happens:

- Solar energy and utility is not

available.

- Solar energy is not sufficient and

utility is not available.

SBU priority

Solar energy provides power to

the loads as first priority.

If solar energy is not sufficient to power all connected loads, battery energy will supply power to the loads at the same time.

Utility provides power to the loads only when battery voltage drops to either low-level warning voltage

or the setting point in program 12.

maximum charging current: To configure total charging current for solar and utility chargers.

(Max. charging current = utility charging current + solar charging current)

60A(Default)

AC input voltage range

Appliances (default)

If selected, acceptable AC input voltage range will be within 90-280VAC

If selected, acceptable AC input voltage range will be within

170-280VAC.

Battery Type

AGM(Default) battery

Flooded battery

User-Defined

If “User-Defined” is selected, battery charge voltage and low DC cut-off voltage can be set up in program 26, 27 and 29.

User-Defined

When the solar energy exists,Set this item to LIB, and the lithium battery will be activated for 3 second.

Auto restart when overload occurs

Restart disable (default)

Restart enable

Auto restart when over temperature occurs

Restart disable (default)

Restart enable

Output frequency

50HZ Default

Output voltage

230V(Default)

Maximum utility charging

Current

Note: If setting value in program 02 is smaller than that in program in 11, the inverter will apply charging

current from program 02 for utility charger

30A(Default)

Setting voltage point back to utility source when selecting “SBU priority” Or “Solar first” in program 01.

Available options in 3.6KW model:

23.0V(default)

Available options in 6.2KW model:

46V (default)

Setting voltage point back to battery mode when selecting “SBU priority” or “Solar first” in program 01.

Available options in 3.6KW model:

Battery fully charged

27V(Default)

Available options in 6.2KW model:

Battery Fully Charged

54V(DEFAULT)

Charger source priority: To configure charger source priority

If this inverter/charger is working in Line, Standby or Fault mode,

charger source can be programmed as below:

Solar first

Solar energy will charge battery as first priority.

Utility will charge battery only

when solar energy is not available.

Solar and Utility (default)

Solar energy and utility will charge battery at the same time.

Only Solar

Solar energy will be the only

charger source no matter utility is available or not.

If this inverter/charger is working in Battery mode or Power saving mode, only solar energy can charge battery. Solar energy will charge battery if it's available and sufficient.

Alarm control

Alarm on (default)

Alarm off

Auto return to default display screen

Return to default display

screen (default)

If selected, no matter how users switch display screen, it will automatically return to default display screen (Input voltage

/output voltage) after no button is

pressed for 1 minute.

Stay at latest screen

If selected, the display screen will stay at latest screen user finally switches.

Backlight control

Backlight on (default)

Backlight off

Beeps while primary source is interrupted

Alarm on (default)

Alarm off

Overload bypass:

When enabled, the unit will transfer to line mode if overload occurs in battery mode.

Bypass disable (default)

Bypass enable

Record Fault code

Record enable (default)

Record disable

Bulk charging voltage (C.V voltage)

3.6KW default setting: 28.2V

6.2Kw default setting: 56.4V

If self-defined is selected in program 5, this program can be set up. Setting range is from 25.0V to 31.5V for 3.6KW model and

48.0V to 61.0V for 6.2xW model. Increment of each click is 0.1V.

Floating charging voltage

3.6KwdefauIt setting: 27.0V

6.2Kw default setting: 54.0V

If self-defined is selected in program 5, this program can be set

up. Setting range is from 25.0V to 31.5V for 3.6KW model and 48.0V to 61.0V for 6.2KW model. Increment of each click is 0.1V.

Low DC cut-off voltage

3.6Kw default setting: 20.0V

6.2Kw default setting: 40.0V

If self-defined is selected in program 5, this program can be set up. Setting range is from 20.0V to 24.0V for 3.6KW model and 40.0V to 48.0V fOf 6.2KW model. Increment of each click is 0.IV. Low DC cut-off voltage will be fixed to setting value no matter

what percentage of load is connected.

Battery equalization

Battery equalization disable (default)

If“FIooded” or “User-Defined” is selected in program 05, this

program can be set up.

Battery equalization voltage

3.6KW default setting: 29.2V

6.2KW default setting: 58.4V

Setting range is from 25.0V to 31.5V foF 3.6KW model and 48.0V

to 61.0V fOF 6.2KW model. Increment of each click is 0.IV.

Battery equalized time

60min (default)

Setting range is from Smin to 900min. Increment of each click is Smin.

Battery equalized timeout

120min (default)

Setting range is from Smin to 900 min. Increment of each click is 5 min.

Equalization interval

30days (default)

Setting range is from 0 to 90 days. Increment of each click is 1 day

Equalization activated immediately

Enable

Disable (default)

If equalization function is enabled in program 30, this program can be set up. If “Enable” is selected in this program, it’s to activate battery equalization immediately and LCD main page will shows